Adjustable Desk Autonomous

The StandDesk was produced by millennials, is marketed right at millennials, and has actually been gobbled up by millennials in impressive quantities. While it carries a ten-year service warranty (the lengthiest of any Chinese-made base), in this instance it’s not necessarily a reputable indication of the anticipated valuable life of the training columns. But for the rate, the StandDesk is a wonderful lower-cost alternative to the UpLift, Jarvis and other Chinese-made desks. Regardless of its security problems this is a far much better product than the Autonomous SmartDesk or IKEA Bekant can ever before hope to be, and a good value overall. It’s the mid-priced offering in the wide classification of Chinese-made desks that is swaying customers from both its more affordable as well as costlier peers.

StandDesk Construction, Arrangement, as well as Devices

Constructing the desk is quite direct if you adhere to the thorough instructions. All of the screws, bolts, washing machines, as well as spring washing machines been available in separate bags that are noted with their location: tabletop, framework, and also spares. There’s a consisted of hex device for fastening all of the bolts right into the structure, or, appear a hex little bit into your power device– simply take care not to over-tighten.

Every one of the parts have a top quality surface to them with rounded corners to stay clear of cut hands. Below is a shot of all the screws that are attached to the leg setting up– it’s not going anywhere!


The foot assembly likewise includes height-adjustable turning equipments to maintain the front-to-back motion of the desk, which was really useful for the carpeted home office floor. I’m likewise utilizing a floor mat to safeguard the carpet from chair wheel damage at sitting elevation, and also push the chair when I’m transitioning to standing height.


The deluxe controller deserved the financial investment. The switches are all variable stress programmed, suggesting the up and down arrows will change the elevation by 1/10th of an inch with a solitary press, or continually adjust the elevation by around 0.7 inches per 2nd if you hold the button for 2 seconds. The memory switches are similar in style: press to recall the elevation setting, or hold the button down for five seconds to keep a new elevation worth. I’m utilizing button 1 for my resting setting as well as switch 4 for my standing position, which gives me 2 and also 3 for anything I could need in the future.


Using my Standdesk

I have actually been using the brand-new workdesk for a few weeks and also have listed my first impacts:

The electric motors are quiet however can be listened to in the next space over. It takes maybe 25 secs for the desk to totally change from sitting to standing based on my presets.
I use an Ergotron side-by-side monitor arm (especially this LX design), triggering the desk to get a little rocky when I move my weight versus the key-board. In hindsight, I should have acquired the bar upgrade for my workdesk after identifying the weight of my monitors. If you plan to do a dual display configuration, get the crossbar.

Because gravity compresses the discs in a human back, I need to elevate the desk greater in the early morning and reduced it in the evening.

An anti-fatigue mat is absolutely important for long duration standing. I purchased an Octagonal mat from SmartCells, using rubber “cells” that are imagined listed below.


Regardless of any kind of troubles I might have had with the handset or the cookie-cutter design, basically all of those worries washed away once I in fact came down to using this point.

I really did not assume it was also possible, the StandDesk in some way manages to be even extra steady than the Jarvis, both at resting and standing elevations. A lot of days I like to run my Jarvis at max elevation while pushed versus my wall surface; not necessarily because it’s that unsteady, however even if I desire as much stability as I can obtain.

The StandDesk one ups the gambit even further, proving to be equally as steady on its own at standing elevation as the Jarvis is with wall support. This is all without the firm’s bar enhancement, which they claim adds much more stability when bought as a part of the bundle deal.When it involves weight resistance, the StandDesk shares yet a lot more statistics with the Jarvis, being ranked for up to 350 pounds of weight capacity.

I have actually been utilizing the desk for about 3 weeks currently for everyday job (and also following standing workdesk finest techniques), whether it’s typing out testimonials similar to this one from our desktop computer or a laptop every now and then. The desk stands up well against non-coastered beverages, and the coating on top of the desk still feels equally as smooth and glossy as the day I opened it in spite of days of sweaty wrists wresting on it and several wipe downs with a rag.

I never purposefully try to damage any workdesks also hard, during some lighter examinations (throwing a collection of secrets onto it from a distance, for example), it still held up without also numerous visible indicators of damage.

When I measured the noise output of the desk while it increased from a sitting position to standing and also back once more, it was by far the quietest we have actually checked. I might barely get it to make greater than regarding 9.5 dB of sound, so if your largest problem is the whirr of your electric motor, this is certainly the one for you.

Customer Service

Currently, normally I do not include much regarding the customer care support of any type of given firm, just due to the fact that I feel that generally if an item works the method its expected to, I should not ever before have a reason to call them to begin with. And while I wish I could state that held true during my experience with StandDesk, I just can’t complete this review without stating the various, relatively countless troubles I came across attempting to obtain my workdesk put together.

For starters, the desk I was sent didn’t have any type of memory phone consisted of initially, which suggested I had no chance of actually controlling the up/down function on the desk itself. I called StandDesk about this concern, who got back to me around a day later on with an apology and also a guarantee that a new one would be shipped quickly.

Standdesk review handset

The source of all our problems …
About 4 days later on a mobile showed up in the mail. The handset at first turned on, but it wasn’t long before I observed that none of the programmable switches worked, nor did the down button, however, for some reason the “memory” switch handled the down feature simply fine. I spoke to the firm once more, and they apologized for the mixup as well as claimed they would have a new panel and control box out to me within the week.

Over two weeks later on my new panel as well as control box arrived. Once I mounted them both the desk finally began functioning the means it was supposed to, but not after almost a month of waiting and to and fro with a firm that couldn’t remember to deliver a core element of their product inside the very same box from the start.

Points to Think about

Despite its bankable functions, this stand up desk also has its very own drawbacks. Given that no single stand workdesk can catch all of the attributes that you might need, you may take into consideration these in your decision-making.

Absence of a Bar as requirement

Not having a maintaining bar is absolutely not a deal-breaker, particularly taking into consideration several of our other preferred workdesks such as the Totally Jarvis likewise do not have one. This desk does have one if you desire, but it is a paid add-on (more on this later too).

The bar is seen by some as a barrier, making it more difficult to put your legs conveniently listed below the desk. Others, on the other hand, discover that they give added security, commonly vital when workdesks are fully expanded.

We have not read any grievances of the security of this desk, so we don’t think its something to truly be concerned regarding, although if you really desired a desk with a crossbar after that we advise you take a look at the Varidesk ProDesk 60 Electric.

Alternatively, StandDesk does supply a different add-on bar that you can include in the desk on your own, just for an extra $49.95.


The security of a standing desk is one of the most vital facets of these desks. Without a secure workdesk you’ll discover it tough to focus, which could bring about you ending up being much less curious about utilizing the desk at standing elevation. To obtain the best return on your financial investment, you’ll wish to more than happy when utilizing the desk.

Because the StandDesk Simple is the very first workdesk that I have actually evaluated with an optional cross support, I will certainly break down my stability tests into two sections. Both tests will consist of the regular front to back shaking examination and a delegated appropriate wobble. The first will lack the cross support and the second will certainly be with it. Just to note, states that the addition of the cross assistance can raise stability by up to 15%. I have no concept how they generated that number.

Without Cross Assistance

Left to Right: The wobble examination was a various circumstance. StandDesk Simple was the second workdesk that I checked that wobbled at the bottom with weight on the desktop computer. The first was the IKEA Bekant. By the time it got to 36″ the rocking movement was bad. Yet point it would certainly impact your work.

With Cross Assistance

Front to Back: Including the cross assistance does not influence the shaking activity. The StandDesk Simple started to experienced a shaking movement at 36″. By 41″ the shaking movement was bad.

Entrusted to Right: Including the cross support to the StandDesk enhanced the wobble movement for lower heights. With the cross support the wobble movement really did not start till you reached 35″. By 39″ the wobble activity came to be bad.

Keep in mind: It’s very vital with adjustable standing desks to totally tighten up all equipment. If there is equipment that is not entirely limited, the activity experienced when included standing height will certainly be overemphasized. This is specifically real with a desk frame that includes 32 screws, there are far way too many factors at which the desk has an opportunity to relocate.

Final thought

Like all the Chinese bases we have actually examined in our labs, we have to narrow our suggestion on the StandDesk Pro to much shorter individuals with narrower desktop computers, as the security simply isn’t there for a large mass raised high off the ground. American-made workdesks will certainly be much better fit to these applications, and also for a fairly noticeable factor. Basically all American-made bases are made in United States manufacturing facilities that are owned by Swedish, Danish or German business that developed this sector, as well as their average people are a great deal taller than the average Oriental customer, so they started making longer-stroke lifting legs a long time ago. And also they have much more robotic automation, laser-cutting tools, and large experience making standing workdesk bases, needless to say.

But if you’re not also high, don’t have an inordinate amount of heavy devices on your desktop computer, and don’t need too wide of a workdesk, the StandDesk Pro will offer you great bang for your buck.

All that could change with Yu’s promised StandDesk Pro 2.0 layout that he expects to launch sometime in the future. Originally we were told we would certainly see it by June 2018. Greater than a year later it has yet to appear, as well as Yu states he’s had difficulty getting the item top quality he needs out of several Chinese factories he’s attempted collaborating with. The brand-new design is allegedly mosting likely to be much easier to assemble as well as have a heftier crossbar style, among other refinements. He states the new base will be used in both a “T-Leg” and “C-Leg” configuration, relieving our problem concerning side-load emphasizing on the training columns.

If this brand-new base ever comes to market we’ll upgrade you here. We’re not holding our breath any kind of longer as the most current news on the firm is that Yu shut the little Los Angeles workplace and also has actually moved it to join with all its other workers in southeast Asia.

In the meantime, a brand-new $399 standing workdesk with outstanding efficiency has actually been present via the brand-new joint endeavor between US-based iMovR as well as China-based Eureka, the i1 electrical standing workdesk. While restricted in dimension as well as shade choices, it has taken the mantle away from StandDesk’s long-ago status as the very best standing desk under $400.

error: Content is protected !!