Adjustable Desk Converter

The StandDesk was developed by millennials, is marketed straight at millennials, and has been gobbled up by millennials in remarkable quantities. While it carries a ten-year warranty (the lengthiest of any Chinese-made base), in this situation it’s not necessarily a reputable indicator of the anticipated valuable life of the training columns. But for the cost, the StandDesk is a fantastic lower-cost option to the UpLift, Jarvis and various other Chinese-made workdesks. In spite of its stability problems this is a much much better product than the Autonomous SmartDesk or IKEA Bekant could ever want to be, as well as a good value in general. It’s the mid-priced offering in the broad group of Chinese-made workdesks that is swaying clients from both its less costly and costlier peers.

StandDesk Construction, Setup, as well as Gizmos

Building the desk is quite easy if you adhere to the in-depth guidelines. Every one of the screws, bolts, washing machines, and spring washing machines been available in separate bags that are noted with their destination: tabletop, structure, as well as spares. There’s a consisted of hex tool for securing every one of the bolts into the framework, or, pop in a hex bit into your power tool– just beware not to over-tighten.

Every one of the components have an excellent quality surface to them with rounded corners to prevent cut hands. Below is a shot of all the bolts that are fastened to the leg setting up– it’s not going anywhere!


The foot assembly likewise includes height-adjustable turning equipments to stabilize the front-to-back movement of the desk, which was extremely practical for the carpeted office flooring. I’m also making use of a floor mat to safeguard the carpeting from chair wheel damage at sitting height, and push the chair back when I’m transitioning to standing height.


The luxurious controller was worth the financial investment. The switches are all variable pressure programmed, suggesting the up and down arrows will change the elevation by 1/10th of an inch with a solitary press, or continually adjust the elevation by about 0.7 inches per second if you hold the switch for two secs. The memory switches are similar in design: push to recall the elevation setup, or hold the button down for 5 seconds to keep a new elevation value. I’m utilizing switch 1 for my resting placement and switch 4 for my standing position, which provides me 2 as well as 3 for anything I may require in the future.


Utilizing my Standdesk

I have actually been making use of the new workdesk for a few weeks and have actually written down my initial impacts:

The electric motors are quiet yet can be listened to in the following space over. It takes possibly 25 secs for the desk to totally shift from sitting to standing based upon my presets.
I make use of an Ergotron side-by-side check arm (specifically this LX model), causing the desk to obtain a little rocky when I move my weight against the key-board. In hindsight, I must have acquired the bar upgrade for my workdesk after establishing the weight of my screens. If you plan to do a twin screen configuration, obtain the bar.

Due to the fact that gravity compresses the discs in a human back, I need to elevate the desk higher in the morning as well as lower it in the evening.

An anti-fatigue mat is definitely essential for long period of time standing. I acquired an Octagonal floor covering from SmartCells, utilizing rubber “cells” that are imagined below.


Regardless of any kind of troubles I might have had with the mobile phone or the cookie-cutter layout, pretty much every one of those worries removed as soon as I in fact came down to using this point.

I really did not assume it was also feasible, the StandDesk in some way takes care of to be even more secure than the Jarvis, both at sitting and also standing heights. Most days I like to run my Jarvis at max elevation while pressed versus my wall surface; not necessarily due to the fact that it’s that unsteady, yet just because I want as much stability as I can obtain.

The StandDesk one ups the gambit also further, confirming to be just as constant by itself at standing elevation as the Jarvis is with wall support. This is all without the business’s crossbar enhancement, which they declare adds much more security when acquired as a part of the package deal.When it involves weight tolerance, the StandDesk shares yet a lot more stats with the Jarvis, being ranked for up to 350 lbs of weight capacity.

I have actually been utilizing the desk for about three weeks currently for day-to-day work (as well as following standing workdesk finest practices), whether it’s inputting out evaluations such as this one from our desktop computer or a laptop once in a while. The desk stands up well versus non-coastered drinks, and the coating on top of the desk still feels just as smooth and also glossy as the day I opened it regardless of days of sweaty wrists wresting on it and multiple clean downs with a dustcloth.

Though I never ever deliberately attempt to dent any workdesks as well hard, during some lighter examinations (tossing a set of tricks onto it from a distance, for instance), it still stood up without a lot of visible indications of damages.

Lastly, when I measured the noise outcome of the desk while it increased from a resting placement to standing and back once more, it was by far the quietest we’ve checked yet. I could barely get it to make more than concerning 9.5 dB of noise, so if your biggest problem is the whirr of your motor, this is certainly the one for you.

Customer Service

Currently, generally I do not include much about the customer support assistance of any provided business, only due to the fact that I really feel that as a whole if a product functions the means its supposed to, I shouldn’t ever before have a factor to call them in the first place. And also while I want I can state that held true during my experience with StandDesk, I just can’t finish this testimonial without pointing out the many, apparently unlimited troubles I ran into attempting to get my desk put together.

For starters, the desk I was sent out really did not have any memory phone consisted of initially, which implied I had no other way of in fact controlling the up/down function on the desk itself. I contacted StandDesk about this problem, that got back to me around a day later on with an apology as well as a promise that a new one would certainly be shipped out shortly.

Standdesk evaluation handset

The source of all our problems …
Concerning 4 days later a phone arrived in the mail. The handset initially switched on, but it had not been long before I saw that none of the programmable buttons worked, neither did the down switch, but also for some reason the “memory” switch dealt with the down feature just fine. I called the firm again, and also they apologized for the mixup as well as stated they would have a new panel as well as control box bent on me within the week.

Over 2 weeks later on my brand-new panel and also control box showed up. Once I installed them both the desk finally began functioning the way it was supposed to, yet not after practically a month of waiting and backward and forward with a firm that could not bear in mind to deliver a core part of their product inside the very same box from the start.

Points to Take into consideration

In spite of its bankable features, this stand up desk additionally has its own disadvantages. Considering that no singular stand workdesk might capture every one of the features that you may need, you might consider these in your decision-making.

Absence of a Crossbar as criterion

Not having a stabilizing bar is absolutely not a deal-breaker, particularly considering a few of our various other favorite workdesks such as the Totally Jarvis also don’t have one. This desk does have one if you desire, but it is a paid add-on (a lot more on this later also).

The bar is seen by some as a hindrance, making it more difficult to put your legs pleasantly listed below the desk. Others, on the other hand, discover that they give included security, usually important when desks are fully prolonged.

We have not review any kind of issues of the stability of this desk, so we don’t think its something to actually be worried concerning, although if you actually desired a desk with a bar then we recommend you take a look at the Varidesk ProDesk 60 Electric.

StandDesk does offer a different add-on crossbar that you can add to the desk on your own, just for an additional $49.95.


The security of a standing desk is one of one of the most vital facets of these desks. Without a stable desk you’ll find it difficult to focus, which could cause you coming to be much less interested in using the desk at standing elevation. To get the most effective return on your financial investment, you’ll want to enjoy when using the desk.

Since the StandDesk Simple is the initial workdesk that I have examined with an optional cross support, I will break down my stability examinations right into 2 areas. Both tests will certainly include the typical front to back shaking test as well as a delegated ideal wobble. The first will certainly lack the cross assistance and also the second will be with it. Just to note, states that the enhancement of the cross support can boost stability by as much as 15%. I have no concept just how they generated that number.

Without Cross Support

Left to Right: The wobble test was a various scenario. StandDesk Simple was the 2nd desk that I tested that tottered near the bottom with weight on the desktop computer. The initial was the IKEA Bekant. By the time it got to 36″ the rocking movement misbehaved. Beyond this point it would certainly influence your work.

With Cross Support

Front to Back: Adding the cross assistance does not affect the shaking movement. The StandDesk Simple began to experienced a rocking activity at 36″. By 41″ the shaking motion was bad.

Entrusted to Right: Including the cross assistance to the StandDesk boosted the wobble activity for lower elevations. With the cross assistance the wobble motion really did not start until you got to 35″. By 39″ the wobble motion came to be bad.

Keep in mind: It’s very vital with flexible standing workdesks to completely tighten up all hardware. If there is equipment that is not entirely limited, the activity experienced when extended to standing elevation will certainly be overemphasized. This is especially real with a desk frame that consists of 32 screws, there are far way too many factors at which the desk has a chance to move.


Like all the Chinese bases we have actually evaluated in our laboratories, we need to tighten our recommendation on the StandDesk Pro to much shorter customers with narrower desktop computers, as the security just isn’t there for a huge mass elevated high off the ground. American-made workdesks will certainly be much better matched to these applications, as well as for a rather apparent factor. Basically all American-made bases are made in US manufacturing facilities that are owned by Swedish, Danish or German companies that designed this market, as well as their average citizens are a whole lot taller than the average Oriental consumer, so they started making longer-stroke training legs a very long time earlier. As well as they have much more robotic automation, laser-cutting equipment, as well as sheer experience making standing workdesk bases, it goes without saying.

If you’re not also tall, do not have an extreme quantity of heavy equipment on your desktop, and also don’t need as well wide of a workdesk, the StandDesk Pro will give you great bang for your dollar.

All that could transform with Yu’s promised StandDesk Pro 2.0 layout that he expects to release sometime in the future. Originally we were told we would certainly see it by June 2018. Greater than a year later on it has yet to emerge, and also Yu states he’s had difficulty obtaining the item quality he requires out of a number of Chinese factories he’s attempted working with. The new design is apparently mosting likely to be a lot easier to construct as well as have a heftier crossbar design, among other improvements. He says the brand-new base will be used in both a “T-Leg” as well as “C-Leg” setup, minimizing our problem about side-load worrying on the lifting columns.

If this brand-new base ever before concerns market we’ll update you below. However we’re not holding our breath any kind of longer as the most recent information on the firm is that Yu closed the tiny Los Angeles workplace as well as has actually transferred it to join with all its various other workers in southeast Asia.

In the meantime, a brand-new $399 standing desk with outstanding performance has actually been present with the new joint venture between US-based iMovR as well as China-based Eureka, the i1 electrical standing workdesk. While restricted in dimension as well as color choices, it has taken the mantle far from StandDesk’s long-ago status as the most effective standing workdesk under $400.

error: Content is protected !!