Adjustable Desk Mechanism

The StandDesk was developed by millennials, is marketed right at millennials, as well as has been demolished by millennials in impressive quantities. While it lugs a ten-year service warranty (the lengthiest of any kind of Chinese-made base), in this instance it’s not necessarily a trusted indicator of the anticipated useful life of the lifting columns. But for the price, the StandDesk is a great lower-cost alternative to the UpLift, Jarvis and other Chinese-made desks. Despite its stability problems this is a far much better product than the Autonomous SmartDesk or IKEA Bekant could ever before want to be, and a good value on the whole. It’s the mid-priced offering in the broad category of Chinese-made workdesks that is swaying clients from both its less expensive and pricier peers.

StandDesk Construction, Configuration, as well as Gizmos

Constructing the desk is pretty straight forward if you comply with the detailed instructions. Every one of the screws, bolts, washers, and springtime washers been available in separate bags that are marked with their location: tabletop, framework, and spares. There’s a consisted of hex device for attaching all of the bolts into the frame, or, pop in a hex bit right into your power tool– simply beware not to over-tighten.

Every one of the components have a high quality surface to them with rounded edges to prevent cut hands. Below is a shot of all the bolts that are fastened to the leg assembly– it’s not going anywhere!


The foot setting up also includes height-adjustable rotation gears to maintain the front-to-back motion of the desk, which was very valuable for the carpeted office flooring. I’m additionally making use of a flooring mat to protect the carpeting from chair wheel damage at resting elevation, and also push the chair back when I’m transitioning to standing height.


The deluxe controller was worth the financial investment. The buttons are all variable pressure programmed, suggesting the backwards and forwards arrows will certainly change the height by 1/10th of an inch with a solitary press, or constantly change the elevation by around 0.7 inches per 2nd if you hold the switch for two seconds. The memory switches are comparable in design: push to remember the elevation setup, or hold the button down for 5 seconds to keep a brand-new height worth. I’m using switch 1 for my resting setting and button 4 for my standing position, which provides me 2 and 3 for anything I may require in the future.


Utilizing my Standdesk

I’ve been using the new workdesk for a few weeks and have jotted down my preliminary impacts:

The electric motors are quiet yet can be listened to in the next space over. It takes possibly 25 seconds for the desk to completely transition from sitting to standing based upon my presets.
I make use of an Ergotron side-by-side keep an eye on arm (especially this LX model), creating the desk to get a little rough when I shift my weight against the key-board. In knowledge, I should have purchased the crossbar upgrade for my workdesk after identifying the weight of my displays. If you plan to do a double monitor setup, obtain the crossbar.

Because gravity presses the discs in a human spine, I require to increase the desk higher in the morning as well as lower it at night.

An anti-fatigue floor covering is definitely crucial for long duration standing. I purchased an Octagonal floor covering from SmartCells, making use of rubber “cells” that are pictured listed below.


Despite any kind of troubles I might have had with the mobile or the cookie-cutter design, practically every one of those problems removed when I in fact came down to using this point.

I didn’t think it was also possible, the StandDesk somehow handles to be even more secure than the Jarvis, both at sitting as well as standing elevations. Many days I such as to run my Jarvis at max elevation while pressed against my wall; not always because it’s that unsteady, however even if I desire as much stability as I can obtain.

The StandDesk one ups the gambit also additionally, showing to be equally as stable by itself at standing elevation as the Jarvis is with wall support. This is all without the firm’s crossbar addition, which they assert adds a lot more security when acquired as a part of the package deal.When it pertains to weight resistance, the StandDesk shares yet much more stats with the Jarvis, being rated for approximately 350 lbs of weight capability.

I have actually been making use of the desk for regarding three weeks now for daily job (and also following standing workdesk finest practices), whether it’s typing out testimonials similar to this one from our desktop computer or a laptop computer periodically. The desk holds up well against non-coastered drinks, and also the finish in addition to the desk still really feels equally as smooth as well as slick as the day I opened it in spite of days of sweaty wrists wresting on it and also several wipe downs with a cloth.

I never deliberately attempt to dent any workdesks also hard, during some lighter tests (tossing a set of keys onto it from a range, for instance), it still held up without as well numerous visible indications of damage.

Lastly, when I gauged the noise output of the desk while it increased from a resting setting to standing and also back once again, it was without a doubt the quietest we have actually checked yet. I could barely get it to make more than about 9.5 dB of noise, so if your biggest problem is the whirr of your motor, this is definitely the one for you.

Client service

Currently, usually I don’t include much regarding the client service support of any type of offered company, only since I feel that as a whole if a product functions the way its intended to, I should not ever have a factor to call them to begin with. And while I want I could state that held true during my experience with StandDesk, I just can not finish this review without mentioning the numerous, relatively endless problems I ran into attempting to obtain my workdesk created.

For starters, the desk I was sent out really did not have any memory mobile consisted of originally, which suggested I had no chance of really regulating the up/down function on the desk itself. I spoke to StandDesk about this problem, that returned to me around a day later with an apology and also a pledge that a new one would certainly be shipped quickly.

Standdesk testimonial handset

The source of all our troubles …
Concerning four days later on a phone showed up in the mail. The phone originally turned on, but it had not been long prior to I saw that none of the programmable switches worked, neither did the down switch, however, for some factor the “memory” button dealt with the down feature simply fine. I spoke to the company again, and also they excused the mixup and claimed they would have a brand-new panel as well as control box out to me within the week.

Over 2 weeks later my brand-new panel and control box showed up. Once I mounted them both the desk lastly started functioning the means it was meant to, yet not after practically a month of waiting and also backward and forward with a firm that couldn’t bear in mind to ship a core part of their item inside the very same box from the start.

Points to Consider

In spite of its bankable attributes, this stand up desk additionally has its very own drawbacks. Considering that no particular stand desk might record every one of the features that you may require, you may consider these in your decision-making.

Absence of a Bar as standard

Not having a supporting bar is definitely not a deal-breaker, especially thinking about several of our various other preferred workdesks such as the Fully Jarvis likewise do not have one. This workdesk does have one if you desire, yet it is a paid add-on (a lot more on this later on too).

The crossbar is seen by some as a limitation, making it harder to position your legs easily below the desk. Others, on the other hand, find that they provide added stability, frequently essential when desks are completely expanded.

We have not check out any type of grievances of the stability of this workdesk, so we don’t assume its something to really be worried concerning, although if you actually desired a desk with a bar then we advise you take a look at the Varidesk ProDesk 60 Electric.

StandDesk does supply a different add-on bar that you can include to the workdesk yourself, simply for an extra $49.95.


The stability of a standing workdesk is just one of one of the most important aspects of these desks. Without a stable desk you’ll discover it hard to focus, which can cause you becoming less thinking about making use of the desk at standing elevation. To obtain the most effective return on your financial investment, you’ll intend to be happy when utilizing the desk.

Due To The Fact That the StandDesk Simple is the first workdesk that I have actually evaluated with an optional cross assistance, I will break down my security tests right into two areas. Both examinations will include the normal front to back rocking examination and a delegated ideal wobble. The very first will certainly be without the cross assistance as well as the secondly will certainly be with it. Just to note, states that the addition of the cross assistance can boost security by up to 15%. I have no suggestion just how they generated that number.

Without Cross Support

Left to Right: The wobble test was a various circumstance. StandDesk Simple was the second workdesk that I tested that wobbled at the bottom with weight on the desktop. The initial was the IKEA Bekant. By the time it got to 36″ the shaking movement was bad. Beyond this point it would influence your work.

With Cross Support

Front to Back: Adding the cross support does not influence the rocking motion. The StandDesk Simple started to experienced a rocking movement at 36″. By 41″ the shaking movement misbehaved.

Left to Right: Including the cross support to the StandDesk improved the wobble activity for lower elevations. With the cross support the wobble motion really did not begin up until you reached 35″. By 39″ the wobble movement became bad.

Keep in mind: It’s very crucial with flexible standing desks to fully tighten up all equipment. If there is hardware that is not totally tight, the movement experienced when included standing height will certainly be overemphasized. This is especially true with a desk framework that consists of 32 screws, there are much too many points at which the desk has a chance to relocate.

Final thought

Like all the Chinese bases we have actually examined in our labs, we need to tighten our suggestion on the StandDesk Pro to much shorter users with narrower desktops, as the stability simply isn’t there for a large mass raised high off the ground. American-made desks will certainly be much better suited to these applications, and also for a rather obvious factor. Virtually all American-made bases are made in US manufacturing facilities that are possessed by Swedish, Danish or German firms that designed this market, and also their average people are a great deal taller than the average Oriental consumer, so they started making longer-stroke lifting legs a very long time ago. And also they have even more robotic automation, laser-cutting devices, and also sheer experience making standing desk bases, needless to say.

Yet if you’re not too high, don’t have an excessive amount of hefty tools on your desktop, and also don’t need also wide of a desk, the StandDesk Pro will give you excellent bang for your buck.

All that may alter with Yu’s assured StandDesk Pro 2.0 layout that he anticipates to launch at some time in the future. Initially we were told we would certainly see it by June 2018. More than a year later it has yet to materialize, as well as Yu states he’s had difficulty obtaining the item top quality he needs out of a number of Chinese factories he’s tried working with. The new layout is allegedly mosting likely to be much easier to put together and have a heftier crossbar layout, to name a few refinements. He says the new base will be offered in both a “T-Leg” and also “C-Leg” setup, reducing our concern about side-load stressing on the lifting columns.

If this brand-new base ever before comes to market we’ll update you here. However we’re not holding our breath any type of longer as one of the most current news on the company is that Yu shut the small Los Angeles workplace as well as has actually transferred it to join with all its various other workers in southeast Asia.

In the meantime, a new $399 standing desk with remarkable performance has actually been introduce with the new joint endeavor between US-based iMovR and also China-based Eureka, the i1 electrical standing desk. While limited in dimension as well as shade choices, it has taken the mantle far from StandDesk’s long-ago status as the most effective standing workdesk under $400.

error: Content is protected !!