Adjustable Desk Risers

The StandDesk was produced by millennials, is marketed straight at millennials, as well as has been demolished by millennials in outstanding volumes. While it lugs a ten-year guarantee (the lengthiest of any kind of Chinese-made base), in this situation it’s not always a reliable indication of the expected useful life of the lifting columns. But also for the cost, the StandDesk is a great lower-cost alternative to the UpLift, Jarvis and also various other Chinese-made workdesks. Despite its stability concerns this is a much better product than the Autonomous SmartDesk or IKEA Bekant might ever intend to be, and a good value on the whole. It’s the mid-priced offering in the broad group of Chinese-made workdesks that is gaining customers from both its less costly and more expensive peers.

StandDesk Building And Construction, Arrangement, and also Devices

Building the desk is pretty straight forward if you follow the detailed guidelines. Every one of the screws, bolts, washers, and springtime washing machines can be found in different bags that are noted with their destination: table top, structure, and also spares. There’s an included hex tool for securing every one of the bolts right into the frame, or, pop in a hex bit into your power device– simply take care not to over-tighten.

Every one of the components have a top quality finish to them with rounded corners to avoid cut hands. Below is a shot of all the bolts that are secured to the leg setting up– it’s not going anywhere!


The foot setting up likewise consists of height-adjustable turning equipments to maintain the front-to-back motion of the desk, which was extremely helpful for the carpeted office floor. I’m additionally using a floor mat to shield the carpet from chair wheel damages at sitting height, and press the chair back when I’m transitioning to standing elevation.


The luxurious controller was worth the investment. The switches are all variable pressure set, suggesting the up and down arrows will change the elevation by 1/10th of an inch with a solitary press, or constantly change the height by about 0.7 inches per 2nd if you hold the button for two secs. The memory switches are comparable in design: push to recall the elevation setup, or hold the button down for 5 seconds to save a brand-new height worth. I’m using button 1 for my sitting placement and button 4 for my standing setting, which provides me 2 as well as 3 for anything I could need in the future.


Using my Standdesk

I’ve been making use of the new desk for a few weeks as well as have listed my preliminary impressions:

The electric motors are quiet however can be listened to in the following area over. It takes probably 25 seconds for the desk to fully shift from sitting to standing based upon my presets.
I utilize an Ergotron side-by-side check arm (specifically this LX version), creating the desk to obtain a little rough when I shift my weight versus the key-board. In knowledge, I should have purchased the bar upgrade for my desk after establishing the weight of my displays. If you intend to do a dual screen configuration, obtain the bar.

Due to the fact that gravity presses the discs in a human back, I require to raise the desk greater in the early morning and reduced it in the evening.

An anti-fatigue mat is absolutely vital for long duration standing. I purchased an Octagonal floor covering from SmartCells, utilizing rubber “cells” that are pictured below.


In spite of any type of problems I may have had with the phone or the cookie-cutter layout, pretty much every one of those issues gotten rid of once I really got down to using this point.

I really did not believe it was also possible, the StandDesk somehow handles to be also much more stable than the Jarvis, both at resting and also standing elevations. Many days I like to run my Jarvis at max height while pushed versus my wall surface; not always due to the fact that it’s that shaky, yet just because I desire as much security as I can obtain.

The StandDesk one ups the gambit even better, proving to be equally as stable on its own at standing elevation as the Jarvis is with wall support. This is all without the firm’s bar addition, which they claim adds even more security when purchased as a part of the package deal.When it involves weight resistance, the StandDesk shares yet even more statistics with the Jarvis, being rated for up to 350 pounds of weight capacity.

I have actually been utilizing the desk for about 3 weeks now for day-to-day job (as well as adhering to standing workdesk best practices), whether it’s inputting out evaluations such as this one from our desktop or a laptop computer every so often. The desk stands up well against non-coastered drinks, as well as the surface on top of the desk still really feels equally as smooth as well as glossy as the day I opened it despite days of perspiring wrists wresting on it and also numerous wipe downs with a dustcloth.

Though I never ever purposefully attempt to damage any type of desks too hard, throughout some lighter tests (tossing a set of tricks onto it from a distance, for instance), it still held up without too many visible indicators of damage.

When I determined the noise outcome of the desk while it climbed from a sitting setting to standing and back once more, it was by far the quietest we’ve tested. I could barely get it to make more than concerning 9.5 dB of noise, so if your greatest concern is the whirr of your motor, this is most definitely the one for you.

Customer Service

Now, typically I do not consist of much regarding the customer service assistance of any kind of offered company, just due to the fact that I really feel that generally if an item works the way its expected to, I should not ever have a reason to call them in the first place. And while I want I could state that was the case throughout my experience with StandDesk, I just can not complete this testimonial without discussing the numerous, apparently limitless troubles I encountered attempting to obtain my desk created.

For beginners, the desk I was sent out really did not have any type of memory mobile phone included originally, which indicated I had no other way of actually regulating the up/down feature on the desk itself. I got in touch with StandDesk about this issue, that got back to me around a day later on with an apology and also a guarantee that a brand-new one would be shipped out shortly.

Standdesk testimonial handset

The resource of all our problems …
About four days later a mobile showed up in the mail. The phone originally activated, but it wasn’t long before I discovered that none of the programmable buttons worked, nor did the down button, however, for some reason the “memory” switch dealt with the down feature just great. I called the business once again, as well as they excused the mixup as well as claimed they would have a new panel and control box bent on me within the week.

Over two weeks later my new panel as well as control box arrived. When I installed them both the desk lastly started working the method it was expected to, however not after practically a month of waiting as well as to and fro with a business that could not remember to ship a core component of their product inside the very same box from the get-go.

Things to Take into consideration

Regardless of its bankable functions, this stand workdesk additionally has its very own downsides. Because no single stand desk might catch every one of the attributes that you might need, you may consider these in your decision-making.

Absence of a Bar as standard

Not having a supporting bar is definitely not a deal-breaker, especially taking into consideration some of our various other preferred workdesks such as the Fully Jarvis likewise don’t have one. This desk does have one if you desire, however it is a paid add-on (a lot more on this later on too).

The crossbar is seen by some as an obstacle, making it tougher to position your legs conveniently below the desk. Others, on the other hand, discover that they supply included stability, usually vital when desks are fully prolonged.

We have not read any kind of problems of the stability of this workdesk, so we don’t assume its something to actually be concerned concerning, although if you really wanted a workdesk with a bar after that we suggest you take a look at the Varidesk ProDesk 60 Electric.

StandDesk does provide a different add-on crossbar that you can add to the desk yourself, simply for an extra $49.95.


The stability of a standing desk is among the most important facets of these desks. Without a secure desk you’ll find it difficult to concentrate, which might cause you coming to be less thinking about utilizing the desk at standing elevation. To obtain the most effective return on your financial investment, you’ll wish to enjoy when making use of the desk.

Since the StandDesk Simple is the initial desk that I have examined with an optional cross support, I will certainly break down my security examinations into 2 areas. Both examinations will certainly include the regular front to back rocking test and also a left to right wobble. The initial will lack the cross support and the secondly will be with it. Just to keep in mind, states that the addition of the cross assistance can boost security by approximately 15%. I have no idea how they created that number.

Without Cross Assistance

Left to Right: The wobble test was a different scenario. StandDesk Simple was the second workdesk that I tested that tottered at the bottom with weight on the desktop computer. The initial was the IKEA Bekant. By the time it got to 36″ the shaking movement was bad. Yet factor it would impact your work.

With Cross Support

Front to Back: Including the cross support does not influence the rocking movement. The StandDesk Simple began to experienced a shaking motion at 36″. By 41″ the rocking movement was bad.

Delegated Right: Adding the cross support to the StandDesk boosted the wobble activity for reduced elevations. With the cross support the wobble motion really did not start until you got to 35″. By 39″ the wobble motion came to be negative.

Keep in mind: It’s really crucial with flexible standing desks to fully tighten up all equipment. If there is equipment that is not entirely limited, the activity experienced when encompassed standing height will be overemphasized. This is specifically real with a desk frame that includes 32 bolts, there are much way too many factors at which the desk has a chance to move.

Final thought

Like all the Chinese bases we have actually evaluated in our laboratories, we need to tighten our referral on the StandDesk Pro to shorter individuals with narrower desktop computers, as the security just isn’t there for a big mass boosted high off the ground. American-made desks will certainly be better fit to these applications, and for a relatively noticeable reason. Basically all American-made bases are made in US factories that are owned by Swedish, Danish or German firms that invented this sector, as well as their typical citizens are a great deal taller than the average Eastern customer, so they started making longer-stroke training legs a long time earlier. And they have much more robot automation, laser-cutting devices, as well as large experience making standing workdesk bases, it goes without saying.

If you’re not also high, don’t have an inordinate amount of heavy tools on your desktop, as well as don’t require also wide of a workdesk, the StandDesk Pro will offer you excellent bang for your buck.

All that may transform with Yu’s guaranteed StandDesk Pro 2.0 layout that he anticipates to launch sometime in the future. Originally we were told we would certainly see it by June 2018. More than a year later it has yet to appear, and Yu states he’s had difficulty getting the product top quality he needs out of numerous Chinese manufacturing facilities he’s attempted collaborating with. The new layout is supposedly mosting likely to be a lot easier to put together as well as have a heftier crossbar design, to name a few refinements. He says the brand-new base will certainly be supplied in both a “T-Leg” and also “C-Leg” setup, alleviating our worry concerning side-load worrying on the training columns.

If this brand-new base ever before comes to market we’ll upgrade you right here. But we’re not holding our breath any longer as the most recent news on the firm is that Yu shut the tiny Los Angeles office as well as has relocated it to accompany all its various other employees in southeast Asia.

In the meantime, a brand-new $399 standing workdesk with excellent efficiency has been present with the brand-new joint venture in between US-based iMovR and China-based Eureka, the i1 electric standing workdesk. While restricted in size as well as shade options, it has taken the mantle far from StandDesk’s long-ago standing as the best standing workdesk under $400.

error: Content is protected !!