Adjustable Rolling Standing Desk

The StandDesk was created by millennials, is marketed right at millennials, and also has been demolished by millennials in remarkable volumes. While it carries a ten-year service warranty (the longest of any type of Chinese-made base), in this situation it’s not always a reliable indicator of the anticipated useful life of the training columns. For the rate, the StandDesk is a great lower-cost choice to the UpLift, Jarvis as well as various other Chinese-made workdesks. Regardless of its stability problems this is a much much better product than the Autonomous SmartDesk or IKEA Bekant could ever intend to be, as well as a good value overall. It’s the mid-priced offering in the wide category of Chinese-made desks that is swaying customers from both its more affordable and costlier peers.

StandDesk Building, Configuration, as well as Devices

Constructing the desk is pretty simple if you adhere to the comprehensive directions. All of the screws, screws, washers, and springtime washing machines can be found in separate bags that are noted with their location: table top, structure, and spares. There’s a consisted of hex device for attaching every one of the screws into the framework, or, pop in a hex little bit into your power device– just beware not to over-tighten.

All of the parts have a high quality finish to them with rounded corners to stay clear of cut hands. Below is a shot of all the bolts that are attached to the leg setting up– it’s not going anywhere!


The foot assembly likewise consists of height-adjustable rotation gears to maintain the front-to-back motion of the desk, which was really helpful for the carpeted home office flooring. I’m also utilizing a floor mat to protect the carpeting from chair wheel damages at sitting elevation, and push the chair when I’m transitioning to standing height.


The luxurious controller was worth the financial investment. The switches are all variable stress set, indicating the backwards and forwards arrows will adjust the elevation by 1/10th of an inch with a solitary press, or continuously adjust the elevation by about 0.7 inches per second if you hold the button for two secs. The memory switches are similar in design: push to recall the height setting, or hold the button down for 5 seconds to keep a new elevation worth. I’m using switch 1 for my sitting placement and button 4 for my standing placement, which provides me 2 and 3 for anything I might require in the future.


Using my Standdesk

I have actually been making use of the brand-new workdesk for a couple of weeks as well as have actually written down my first impacts:

The electric motors are quiet yet can be listened to in the next area over. It takes possibly 25 seconds for the desk to completely shift from resting to standing based upon my presets.
I make use of an Ergotron side-by-side keep an eye on arm (especially this LX design), triggering the desk to obtain a little rough when I move my weight against the key-board. In hindsight, I need to have purchased the crossbar upgrade for my desk after establishing the weight of my displays. If you plan to do a twin display setup, obtain the bar.

Since gravity compresses the discs in a human back, I need to elevate the desk greater in the morning and reduced it in the evening.

An anti-fatigue mat is absolutely essential for long period of time standing. I bought an Octagonal floor covering from SmartCells, utilizing rubber “cells” that are visualized below.


In spite of any type of troubles I may have had with the mobile or the cookie-cutter style, pretty much every one of those issues removed as soon as I actually got down to using this thing.

I didn’t assume it was also possible, the StandDesk in some way handles to be even extra steady than the Jarvis, both at sitting and standing elevations. The majority of days I such as to run my Jarvis at max height while pushed versus my wall surface; not always since it’s that wobbly, but just because I desire as much stability as I can get.

The StandDesk one ups the gambit also better, verifying to be just as consistent on its own at standing height as the Jarvis is with wall support. This is all without the company’s bar addition, which they assert includes a lot more stability when acquired as a part of the bundle deal.When it concerns weight resistance, the StandDesk shares yet even more statistics with the Jarvis, being ranked for as much as 350 pounds of weight ability.

I have actually been utilizing the desk for regarding three weeks currently for day-to-day job (and also complying with standing workdesk best practices), whether it’s inputting out reviews like this one from our desktop computer or a laptop computer every now and then. The desk stands up well against non-coastered beverages, and the finish on top of the desk still really feels just as smooth and also glossy as the day I opened it despite days of sweaty wrists wresting on it and several wipe downs with a cloth.

Though I never ever intentionally try to dent any workdesks too hard, throughout some lighter examinations (tossing a collection of secrets onto it from a range, for instance), it still stood up without a lot of visible indications of damages.

Finally, when I determined the sound result of the desk while it rose from a sitting position to standing as well as back once again, it was without a doubt the quietest we’ve checked yet. I could hardly get it to make greater than concerning 9.5 dB of sound, so if your largest worry is the whirr of your motor, this is certainly the one for you.

Customer Service

Now, usually I don’t consist of much about the customer support support of any type of offered business, only since I really feel that as a whole if a product works the means its expected to, I should not ever before have a factor to call them to begin with. And also while I desire I can state that was the case throughout my experience with StandDesk, I simply can’t complete this review without discussing the various, seemingly unlimited issues I experienced attempting to obtain my desk assembled.

For beginners, the desk I was sent really did not have any type of memory mobile consisted of originally, which implied I had no other way of really controlling the up/down feature on the desk itself. I got in touch with StandDesk regarding this problem, that got back to me around a day later on with an apology as well as a promise that a new one would be shipped out shortly.

Standdesk evaluation handset

The source of all our troubles …
Concerning four days later a mobile phone arrived in the mail. The mobile initially turned on, but it wasn’t long before I discovered that none of the programmable switches worked, nor did the down switch, however, for some factor the “memory” switch took care of the down function simply great. I called the firm again, as well as they excused the mixup and stated they would certainly have a brand-new panel and control box bent on me within the week.

Over two weeks later my new panel and also control box got here. As soon as I mounted them both the desk lastly began functioning the method it was supposed to, yet not after nearly a month of waiting and back and forth with a business that could not remember to ship a core element of their product inside the very same box from the start.

Points to Think about

In spite of its bankable attributes, this stand desk additionally has its very own drawbacks. Given that no singular stand desk might capture every one of the functions that you might need, you may take into consideration these in your decision-making.

Absence of a Crossbar as requirement

Not having a maintaining bar is definitely not a deal-breaker, particularly taking into consideration a few of our other favorite desks such as the Fully Jarvis also don’t have one. As a matter of fact, this workdesk does have one if you desire, but it is a paid add-on (extra on this later on too).

The bar is seen by some as an obstacle, making it more difficult to place your legs conveniently below the desk. Others, on the other hand, discover that they give included stability, usually crucial when workdesks are completely extended.

We have not review any problems of the security of this desk, so we don’t think its something to actually be concerned regarding, although if you really desired a workdesk with a bar then we suggest you have a look at the Varidesk ProDesk 60 Electric.

Conversely, StandDesk does offer a different add-on crossbar that you can add to the desk on your own, just for an added $49.95.


The stability of a standing desk is just one of one of the most vital elements of these desks. Without a secure workdesk you’ll discover it tough to focus, which might cause you ending up being much less interested in making use of the desk at standing elevation. To get the best return on your investment, you’ll intend to enjoy when utilizing the desk.

Since the StandDesk Simple is the first desk that I have checked with an optional cross support, I will certainly break down my security tests right into 2 sections. Both tests will consist of the common front to back rocking examination and a left to right wobble. The initial will lack the cross support as well as the secondly will be with it. Just to note, claims that the enhancement of the cross support can increase stability by as much as 15%. I have no concept exactly how they thought of that number.

Without Cross Support

Left to Right: The wobble test was a different situation. StandDesk Simple was the 2nd workdesk that I evaluated that wobbled at the bottom with weight on the desktop computer. The first was the IKEA Bekant. By the time it got to 36″ the shaking movement was bad. Yet factor it would influence your job.

With Cross Support

Front to Back: Adding the cross assistance does not influence the shaking movement. The StandDesk Simple began to experienced a shaking movement at 36″. By 41″ the rocking movement was bad.

Delegated Right: Including the cross support to the StandDesk improved the wobble motion for lower heights. With the cross assistance the wobble motion really did not start till you got to 35″. By 39″ the wobble activity came to be bad.

Note: It’s extremely important with flexible standing desks to totally tighten up all hardware. If there is hardware that is not entirely tight, the motion experienced when encompassed standing elevation will be overemphasized. This is particularly true with a workdesk structure that includes 32 bolts, there are much way too many points at which the desk has a possibility to move.


Like all the Chinese bases we have actually evaluated in our labs, we need to narrow our recommendation on the StandDesk Pro to shorter individuals with narrower desktop computers, as the stability just isn’t there for a large mass boosted high off the ground. American-made desks will be much better suited to these applications, and also for a fairly obvious factor. Practically all American-made bases are made in US factories that are possessed by Swedish, Danish or German business that invented this industry, and also their ordinary citizens are a whole lot taller than the ordinary Asian customer, so they started making longer-stroke lifting legs a long period of time ago. As well as they have much more robotic automation, laser-cutting tools, and sheer experience making standing desk bases, needless to say.

However if you’re not also high, do not have an extreme quantity of hefty devices on your desktop computer, and don’t require also wide of a desk, the StandDesk Pro will provide you good value.

All that may transform with Yu’s assured StandDesk Pro 2.0 style that he anticipates to release sometime in the future. Initially we were informed we ‘d see it by June 2018. Greater than a year later it has yet to materialize, and Yu states he’s had problem getting the item top quality he requires out of a number of Chinese factories he’s tried working with. The new layout is apparently mosting likely to be a lot easier to set up and also have a heftier crossbar layout, among other improvements. He says the new base will certainly be used in both a “T-Leg” as well as “C-Leg” configuration, alleviating our worry concerning side-load stressing on the lifting columns.

If this new base ever before comes to market we’ll upgrade you right here. However we’re not holding our breath any longer as the most recent information on the business is that Yu shut the tiny Los Angeles workplace and has actually moved it to join with all its various other employees in southeast Asia.

In the meantime, a new $399 standing workdesk with remarkable performance has actually been present with the brand-new joint venture between US-based iMovR as well as China-based Eureka, the i1 electrical standing workdesk. While limited in size and also shade alternatives, it has actually taken the mantle away from StandDesk’s long-ago status as the best standing desk under $400.

error: Content is protected !!