The StandDesk was developed by millennials, is marketed directly at millennials, and also has been gobbled up by millennials in impressive quantities. While it lugs a ten-year service warranty (the longest of any type of Chinese-made base), in this instance it’s not necessarily a trustworthy indication of the expected useful life of the lifting columns. But for the cost, the StandDesk is a great lower-cost alternative to the UpLift, Jarvis as well as other Chinese-made workdesks. Regardless of its security concerns this is a far better item than the Autonomous SmartDesk or IKEA Bekant might ever intend to be, as well as a good value overall. It’s the mid-priced offering in the broad group of Chinese-made workdesks that is gaining clients from both its more affordable and also pricier peers.
StandDesk Building And Construction, Configuration, and Devices
Building the desk is quite direct if you follow the detailed instructions. Every one of the screws, screws, washers, and also spring washing machines come in separate bags that are marked with their destination: table top, frame, and spares. There’s an included hex tool for attaching every one of the screws right into the framework, or, pop in a hex little bit into your power device– just beware not to over-tighten.
All of the parts have a premium quality finish to them with rounded edges to stay clear of cut hands. Below is a shot of all the bolts that are secured to the leg assembly– it’s not going anywhere!
Standdesk-Leg
The foot assembly additionally consists of height-adjustable rotation gears to stabilize the front-to-back motion of the desk, which was extremely valuable for the carpeted office flooring. I’m additionally using a flooring mat to protect the carpeting from chair wheel damages at sitting height, as well as push the chair when I’m transitioning to standing height.
Standdesk-Foot
The luxurious controller deserved the investment. The buttons are all variable pressure programmed, implying the up and down arrows will change the height by 1/10th of an inch with a single press, or continuously adjust the height by about 0.7 inches per second if you hold the button for two secs. The memory switches are similar in layout: push to recall the height setup, or hold the button down for 5 seconds to keep a brand-new elevation worth. I’m using button 1 for my sitting setting and switch 4 for my standing position, which gives me 2 and also 3 for anything I might require in the future.
Standdesk-Memory-unit
Using my Standdesk
I’ve been making use of the brand-new desk for a couple of weeks as well as have documented my first impacts:
The motors are quiet yet can be heard in the next space over. It takes possibly 25 seconds for the desk to completely transition from sitting to standing based on my presets.
I use an Ergotron side-by-side check arm (particularly this LX model), triggering the desk to get a little rocky when I move my weight against the keyboard. In knowledge, I ought to have purchased the crossbar upgrade for my desk after figuring out the weight of my displays. If you prepare to do a double screen arrangement, obtain the bar.
Since gravity presses the discs in a human spinal column, I require to elevate the desk higher in the morning and lower it in the evening.
An anti-fatigue mat is definitely crucial for long duration standing. I acquired an Octagonal mat from SmartCells, utilizing rubber “cells” that are imagined listed below.
Performance
Regardless of any troubles I may have had with the handset or the cookie-cutter style, practically all of those worries gotten rid of when I in fact came down to using this point.
Although I really did not believe it was even possible, the StandDesk somehow handles to be much more steady than the Jarvis, both at sitting and also standing elevations. The majority of days I such as to run my Jarvis at max height while pressed versus my wall surface; not necessarily because it’s that wobbly, however just because I desire as much stability as I can obtain.
The StandDesk one ups the gambit even further, showing to be equally as steady on its own at standing height as the Jarvis is with wall support. This is all without the business’s bar addition, which they claim adds even more security when bought as a part of the plan deal.When it concerns weight tolerance, the StandDesk shares yet a lot more stats with the Jarvis, being rated for as much as 350 pounds of weight capability.
I’ve been utilizing the desk for concerning three weeks now for everyday work (and adhering to standing desk finest methods), whether it’s keying out testimonials similar to this one from our desktop computer or a laptop every so often. The desk holds up well versus non-coastered beverages, and the coating on top of the desk still really feels just as smooth and slick as the day I opened it regardless of days of sweaty wrists wresting on it and also numerous clean downs with a dustcloth.
Though I never purposefully try to damage any kind of workdesks too hard, during some lighter tests (throwing a set of keys onto it from a range, for instance), it still stood up without too many noticeable indicators of damage.
Lastly, when I gauged the noise result of the desk while it climbed from a resting placement to standing and back once again, it was without a doubt the quietest we have actually tested yet. I might barely get it to make more than concerning 9.5 dB of noise, so if your most significant concern is the whirr of your electric motor, this is most definitely the one for you.
Customer care
Currently, normally I don’t include much regarding the customer support support of any type of offered business, just since I really feel that as a whole if a product works the way its intended to, I shouldn’t ever have a factor to call them to begin with. And while I wish I might claim that was the case during my experience with StandDesk, I just can’t complete this testimonial without mentioning the various, apparently unlimited troubles I ran into trying to get my workdesk assembled.
For starters, the desk I was sent really did not have any type of memory handset consisted of initially, which meant I had no way of in fact controlling the up/down feature on the desk itself. I got in touch with StandDesk regarding this issue, who returned to me around a day later on with an apology and also a guarantee that a brand-new one would be shipped soon.
Standdesk review handset
The resource of all our issues …
Concerning four days later a mobile phone got here in the mail. The mobile phone at first turned on, but it had not been long before I discovered that none of the programmable switches functioned, neither did the down switch, but for some factor the “memory” switch handled the down feature just fine. I spoke to the company once more, as well as they excused the mixup and also stated they would certainly have a new panel as well as control box out to me within the week.
Over 2 weeks later on my brand-new panel and control box got here. As soon as I installed them both the desk ultimately began functioning the method it was meant to, yet not after practically a month of waiting and back and forth with a company that couldn’t remember to deliver a core element of their item inside the exact same box from the outset.
Things to Think about
Despite its bankable functions, this stand desk also has its own drawbacks. Given that no particular stand desk can capture every one of the attributes that you might need, you might take into consideration these in your decision-making.
Lack of a Bar as standard
Not having a supporting crossbar is absolutely not a deal-breaker, particularly considering some of our other favored workdesks such as the Completely Jarvis also do not have one. This desk does have one if you desire, however it is a paid add-on (extra on this later as well).
The crossbar is seen by some as a limitation, making it more challenging to put your legs conveniently below the desk. Others, on the other hand, locate that they provide included security, frequently essential when desks are totally prolonged.
We have not read any issues of the stability of this workdesk, so we don’t think its something to really be worried concerning, although if you actually wanted a workdesk with a bar then we suggest you take a look at the Varidesk ProDesk 60 Electric.
StandDesk does supply a separate add-on crossbar that you can include to the desk on your own, simply for an extra $49.95.
Stability
The stability of a standing desk is one of the most essential aspects of these workdesks. Without a stable workdesk you’ll find it difficult to concentrate, which might lead to you ending up being much less thinking about using the desk at standing elevation. To obtain the most effective return on your investment, you’ll intend to more than happy when making use of the desk.
Because the StandDesk Simple is the first desk that I have actually evaluated with an optional cross support, I will break down my security tests into 2 sections. Both examinations will certainly consist of the regular front to back shaking examination and a delegated appropriate wobble. The very first will certainly lack the cross assistance and also the second will certainly be with it. Simply to keep in mind, StandDesk.co claims that the enhancement of the cross support can raise security by approximately 15%. I have no concept exactly how they generated that number.
Without Cross Assistance
Left to Right: The wobble examination was a various scenario. StandDesk Simple was the 2nd workdesk that I checked that wobbled near the bottom with weight on the desktop computer. The initial was the IKEA Bekant. By the time it reached 36″ the rocking activity was bad. Beyond this factor it would influence your job.
With Cross Assistance
Front to Back: Adding the cross assistance does not influence the shaking movement. The StandDesk Simple began to experienced a rocking movement at 36″. By 41″ the rocking activity was bad.
Delegated Right: Adding the cross assistance to the StandDesk improved the wobble movement for lower elevations. With the cross support the wobble motion really did not begin till you reached 35″. By 39″ the wobble activity became poor.
Keep in mind: It’s very vital with adjustable standing workdesks to fully tighten all equipment. If there is hardware that is not totally tight, the motion experienced when included standing elevation will certainly be exaggerated. This is particularly real with a workdesk frame that includes 32 screws, there are much way too many factors at which the desk has a chance to move.
Final thought
Like all the Chinese bases we’ve tested in our laboratories, we need to narrow our recommendation on the StandDesk Pro to much shorter users with narrower desktops, as the security just isn’t there for a large mass elevated high off the ground. American-made workdesks will be better suited to these applications, and for a relatively evident factor. Basically all American-made bases are made in US manufacturing facilities that are owned by Swedish, Danish or German firms that designed this market, as well as their ordinary residents are a lot taller than the typical Oriental customer, so they started making longer-stroke training legs a very long time back. And also they have much more robot automation, laser-cutting tools, and also large experience making standing workdesk bases, obviously.
However if you’re not as well high, don’t have an excessive amount of heavy devices on your desktop, and also don’t require too wide of a workdesk, the StandDesk Pro will offer you excellent bang for your buck.
All that might alter with Yu’s assured StandDesk Pro 2.0 style that he anticipates to launch at some point in the future. Originally we were told we would certainly see it by June 2018. More than a year later on it has yet to materialize, and Yu states he’s had trouble getting the item high quality he requires out of numerous Chinese manufacturing facilities he’s attempted dealing with. The brand-new layout is apparently going to be a lot easier to construct and also have a heftier bar style, to name a few improvements. He says the new base will be provided in both a “T-Leg” and “C-Leg” configuration, reducing our concern regarding side-load stressing on the lifting columns.
If this brand-new base ever pertains to market we’ll upgrade you below. We’re not holding our breath any kind of longer as the most current news on the firm is that Yu closed the little Los Angeles office and also has moved it to join with all its various other employees in southeast Asia.
In the meantime, a brand-new $399 standing workdesk with impressive performance has been present with the brand-new joint venture between US-based iMovR and China-based Eureka, the i1 electric standing desk. While limited in size and also shade alternatives, it has taken the mantle away from StandDesk’s long-ago condition as the best standing desk under $400.