The StandDesk was developed by millennials, is marketed straight at millennials, and also has been gobbled up by millennials in remarkable quantities. While it brings a ten-year warranty (the lengthiest of any Chinese-made base), in this situation it’s not always a reputable indicator of the anticipated beneficial life of the lifting columns. For the price, the StandDesk is a fantastic lower-cost choice to the UpLift, Jarvis and also other Chinese-made desks. In spite of its stability issues this is a far better item than the Autonomous SmartDesk or IKEA Bekant could ever want to be, as well as a good value in general. It’s the mid-priced offering in the wide group of Chinese-made workdesks that is winning over consumers from both its more affordable as well as costlier peers.

StandDesk Construction, Setup, as well as Gadgets

Building the desk is pretty easy if you adhere to the thorough instructions. Every one of the screws, screws, washers, and spring washing machines been available in different bags that are noted with their destination: tabletop, framework, and spares. There’s an included hex tool for fastening every one of the screws right into the structure, or, appear a hex little bit right into your power device– simply take care not to over-tighten.

Every one of the parts have a high quality coating to them with rounded edges to prevent cut hands. Below is a shot of all the screws that are attached to the leg setting up– it’s not going anywhere!

Standdesk-Leg

The foot setting up additionally consists of height-adjustable rotation gears to support the front-to-back activity of the desk, which was really helpful for the carpeted office flooring. I’m additionally making use of a flooring mat to protect the carpet from chair wheel damage at sitting height, and press the chair when I’m transitioning to standing height.

Standdesk-Foot

The deluxe controller was worth the financial investment. The switches are all variable stress programmed, indicating the up and down arrowheads will certainly readjust the elevation by 1/10th of an inch with a solitary press, or continuously adjust the height by around 0.7 inches per 2nd if you hold the button for two secs. The memory buttons are comparable in design: press to remember the elevation setup, or hold the button down for 5 secs to keep a new elevation worth. I’m making use of switch 1 for my resting placement and switch 4 for my standing position, which provides me 2 as well as 3 for anything I could require in the future.

Standdesk-Memory-unit

Utilizing my Standdesk

I have actually been using the new workdesk for a couple of weeks as well as have documented my first impacts:

The electric motors are quiet yet can be listened to in the next area over. It takes probably 25 secs for the desk to fully transition from sitting to standing based on my presets.
I use an Ergotron side-by-side keep track of arm (specifically this LX version), triggering the desk to get a little rocky when I change my weight against the key-board. In knowledge, I need to have bought the bar upgrade for my workdesk after determining the weight of my screens. If you prepare to do a twin screen arrangement, get the crossbar.

Since gravity presses the discs in a human spine, I need to elevate the desk higher in the early morning and also reduced it at night.

An anti-fatigue floor covering is absolutely essential for long period of time standing. I acquired an Octagonal floor covering from SmartCells, making use of rubber “cells” that are imagined below.

Efficiency

Regardless of any troubles I might have had with the phone or the cookie-cutter design, practically every one of those worries gotten rid of when I actually got down to utilizing this thing.

Although I really did not assume it was also feasible, the StandDesk somehow manages to be a lot more stable than the Jarvis, both at resting and also standing elevations. The majority of days I like to run my Jarvis at max elevation while pushed versus my wall surface; not always due to the fact that it’s that unsteady, yet just because I desire as much security as I can get.

The StandDesk one ups the gambit also additionally, proving to be equally as consistent on its own at standing elevation as the Jarvis is with wall support. This is all without the business’s bar addition, which they claim adds much more stability when bought as a part of the package deal.When it concerns weight tolerance, the StandDesk shares yet even more statistics with the Jarvis, being ranked for up to 350 pounds of weight capacity.

I’ve been making use of the desk for concerning 3 weeks currently for everyday job (and also following standing desk best methods), whether it’s typing out reviews such as this one from our desktop computer or a laptop computer periodically. The desk stands up well against non-coastered beverages, and the coating on top of the desk still really feels equally as smooth and also glossy as the day I opened it regardless of days of perspiring wrists wresting on it and multiple clean downs with a rag.

I never purposefully attempt to dent any desks also hard, during some lighter tests (throwing a collection of secrets onto it from a range, for example), it still held up without as well numerous noticeable signs of damage.

When I measured the sound output of the workdesk while it rose from a resting placement to standing and also back once again, it was by much the quietest we’ve examined. I could barely get it to make greater than about 9.5 dB of noise, so if your biggest problem is the whirr of your motor, this is definitely the one for you.

Customer care

Now, usually I do not include much regarding the client service support of any given business, only due to the fact that I really feel that generally if a product functions the method its intended to, I should not ever have a factor to call them in the first place. And also while I want I might say that held true during my experience with StandDesk, I simply can not finish this evaluation without stating the many, seemingly countless troubles I came across attempting to obtain my workdesk created.

For starters, the desk I was sent out really did not have any memory phone consisted of initially, which suggested I had no way of really managing the up/down function on the desk itself. I spoke to StandDesk concerning this issue, who returned to me around a day later with an apology and also a guarantee that a brand-new one would be shipped out soon.

Standdesk review handset

The resource of all our troubles …
About 4 days later a mobile phone got here in the mail. The mobile originally turned on, yet it had not been long prior to I observed that none of the programmable buttons functioned, nor did the down switch, but for some reason the “memory” button dealt with the down feature simply fine. I spoke to the company once more, as well as they excused the mixup as well as claimed they would have a brand-new panel and also control box out to me within the week.

Over two weeks later my brand-new panel and also control box got here. Once I installed them both the desk ultimately started working the method it was supposed to, however not after practically a month of waiting as well as to and fro with a company that could not keep in mind to deliver a core component of their product inside the exact same box from the beginning.

Points to Think about

Regardless of its bankable functions, this stand desk likewise has its very own drawbacks. Since no singular stand desk could capture all of the functions that you may require, you might take into consideration these in your decision-making.

Lack of a Crossbar as requirement

Not having a supporting bar is certainly not a deal-breaker, specifically thinking about a few of our other favorite workdesks such as the Fully Jarvis additionally don’t have one. This desk does have one if you want, but it is a paid add-on (more on this later also).

The bar is seen by some as a hindrance, making it more challenging to put your legs easily below the desk. Others, on the other hand, locate that they provide added stability, usually critical when desks are completely expanded.

We have not read any issues of the security of this desk, so we don’t think its something to truly be worried about, although if you really wanted a workdesk with a bar then we advise you have a look at the Varidesk ProDesk 60 Electric.

Additionally, StandDesk does use a different add-on crossbar that you can add to the desk on your own, just for an extra $49.95.

Stability

The stability of a standing desk is just one of one of the most important aspects of these desks. Without a steady workdesk you’ll locate it hard to concentrate, which might bring about you coming to be much less thinking about using the desk at standing height. To obtain the best return on your financial investment, you’ll intend to be happy when making use of the desk.

Because the StandDesk Simple is the first workdesk that I have evaluated with an optional cross support, I will break down my security examinations into two areas. Both examinations will certainly include the regular front to back shaking examination and also an entrusted to ideal wobble. The very first will certainly be without the cross assistance as well as the second will be with it. Simply to keep in mind, StandDesk.co claims that the addition of the cross support can increase security by as much as 15%. I have no suggestion how they created that number.

Without Cross Support

Left to Right: The wobble test was a various situation. StandDesk Simple was the second desk that I checked that wobbled at the bottom with weight on the desktop. The very first was the IKEA Bekant. By the time it got to 36″ the rocking movement misbehaved. Yet factor it would affect your job.

With Cross Support

Front to Back: Adding the cross assistance does not influence the rocking activity. The StandDesk Simple started to experienced a shaking movement at 36″. By 41″ the shaking movement was bad.

Left to Right: Including the cross assistance to the StandDesk improved the wobble activity for reduced heights. With the cross assistance the wobble activity really did not begin until you got to 35″. By 39″ the wobble movement came to be bad.

Keep in mind: It’s very vital with flexible standing desks to completely tighten all equipment. If there is hardware that is not totally limited, the activity experienced when included standing height will certainly be exaggerated. This is particularly true with a desk frame that consists of 32 bolts, there are far way too many points at which the desk has a chance to relocate.

Conclusion

Like all the Chinese bases we have actually evaluated in our labs, we have to tighten our suggestion on the StandDesk Pro to shorter individuals with narrower desktop computers, as the security just isn’t there for a huge mass elevated high off the ground. American-made workdesks will certainly be better suited to these applications, and also for a relatively apparent factor. Basically all American-made bases are made in United States factories that are had by Swedish, Danish or German companies that invented this industry, and also their average citizens are a great deal taller than the ordinary Asian consumer, so they started making longer-stroke lifting legs a long time ago. And they have even more robotic automation, laser-cutting equipment, as well as large experience making standing workdesk bases, it goes without saying.

But if you’re not also high, do not have an excessive quantity of heavy equipment on your desktop, and also don’t require as well wide of a workdesk, the StandDesk Pro will certainly provide you good bang for your buck.

All that could alter with Yu’s assured StandDesk Pro 2.0 design that he expects to launch at some point in the future. Initially we were informed we would certainly see it by June 2018. Greater than a year later on it has yet to appear, and also Yu states he’s had problem obtaining the product quality he requires out of numerous Chinese factories he’s attempted collaborating with. The new design is allegedly mosting likely to be a lot easier to construct and also have a heftier crossbar design, to name a few refinements. He says the new base will be supplied in both a “T-Leg” and “C-Leg” configuration, easing our issue about side-load stressing on the training columns.

If this new base ever concerns market we’ll upgrade you right here. Yet we’re not holding our breath any type of longer as the most recent information on the business is that Yu shut the tiny Los Angeles workplace and has actually relocated it to accompany all its other employees in southeast Asia.

In the meantime, a new $399 standing desk with excellent performance has actually been present with the new joint venture in between US-based iMovR as well as China-based Eureka, the i1 electrical standing desk. While restricted in dimension as well as color choices, it has actually taken the mantle far from StandDesk’s long-ago condition as the best standing workdesk under $400.

The StandDesk was developed by millennials, is marketed straight at millennials, as well as has been gobbled up by millennials in remarkable quantities. While it carries a ten-year service warranty (the lengthiest of any type of Chinese-made base), in this instance it’s not always a trustworthy indication of the anticipated valuable life of the lifting columns. For the cost, the StandDesk is a fantastic lower-cost choice to the UpLift, Jarvis and other Chinese-made workdesks. Despite its security problems this is a much better item than the Autonomous SmartDesk or IKEA Bekant might ever before hope to be, and also a good value overall. It’s the mid-priced offering in the wide category of Chinese-made desks that is winning over clients from both its less expensive and pricier peers.

StandDesk Construction, Configuration, and Devices

Building the desk is quite straight forward if you comply with the in-depth directions. All of the screws, screws, washers, and also spring washing machines can be found in different bags that are marked with their destination: table top, structure, and spares. There’s a consisted of hex tool for fastening every one of the bolts into the framework, or, pop in a hex little bit into your power device– just beware not to over-tighten.

All of the parts have an excellent quality surface to them with rounded edges to avoid cut hands. Below is a shot of all the bolts that are fastened to the leg assembly– it’s not going anywhere!

Standdesk-Leg

The foot setting up also includes height-adjustable turning gears to maintain the front-to-back movement of the desk, which was really useful for the carpeted home office floor. I’m additionally using a floor mat to protect the carpeting from chair wheel damages at sitting height, and also press the chair back when I’m transitioning to standing elevation.

Standdesk-Foot

The deluxe controller deserved the financial investment. The switches are all variable stress configured, suggesting the backwards and forwards arrowheads will readjust the height by 1/10th of an inch with a solitary press, or constantly change the height by around 0.7 inches per second if you hold the button for 2 seconds. The memory buttons are comparable in design: press to recall the height setup, or hold the button down for 5 secs to keep a new height value. I’m making use of button 1 for my sitting position and also switch 4 for my standing setting, which offers me 2 and also 3 for anything I may need in the future.

Standdesk-Memory-unit

Using my Standdesk

I have actually been using the brand-new desk for a few weeks and also have actually written down my first impacts:

The motors are quiet but can be heard in the next space over. It takes probably 25 seconds for the desk to totally transition from sitting to standing based on my presets.
I use an Ergotron side-by-side monitor arm (especially this LX design), causing the desk to get a little rough when I move my weight against the keyboard. In hindsight, I must have acquired the crossbar upgrade for my workdesk after determining the weight of my screens. If you prepare to do a dual monitor arrangement, obtain the bar.

Since gravity presses the discs in a human spine, I need to elevate the desk higher in the early morning and lower it at night.

An anti-fatigue mat is definitely important for long period of time standing. I bought an Octagonal floor covering from SmartCells, making use of rubber “cells” that are visualized below.

Performance

Despite any problems I might have had with the handset or the cookie-cutter layout, pretty much all of those worries removed as soon as I actually got down to using this point.

I really did not think it was also feasible, the StandDesk somehow manages to be even more secure than the Jarvis, both at sitting and also standing elevations. A lot of days I such as to run my Jarvis at max elevation while pressed against my wall surface; not necessarily because it’s that shaky, but even if I want as much stability as I can obtain.

The StandDesk one ups the gambit also additionally, verifying to be just as steady by itself at standing elevation as the Jarvis is with wall support. This is all without the firm’s bar enhancement, which they claim adds even more stability when purchased as a part of the package deal.When it involves weight tolerance, the StandDesk shares yet a lot more stats with the Jarvis, being rated for up to 350 lbs of weight ability.

I’ve been using the desk for about 3 weeks now for everyday work (and complying with standing desk finest methods), whether it’s typing out reviews similar to this one from our desktop computer or a laptop once in a while. The desk holds up well against non-coastered drinks, and also the coating in addition to the desk still feels equally as smooth and also slick as the day I opened it in spite of days of perspiring wrists wresting on it and also several wipe downs with a cloth.

I never purposefully try to damage any type of workdesks as well hard, during some lighter tests (tossing a set of tricks onto it from a distance, for instance), it still held up without as well lots of noticeable indicators of damages.

When I measured the noise output of the desk while it climbed from a resting position to standing and back once more, it was by far the quietest we have actually tested. I can hardly get it to make greater than concerning 9.5 dB of sound, so if your biggest problem is the whirr of your electric motor, this is definitely the one for you.

Customer support

Now, normally I do not include much concerning the client service assistance of any kind of offered firm, just due to the fact that I really feel that in general if an item functions the means its expected to, I should not ever before have a factor to call them to begin with. And also while I wish I could claim that was the case during my experience with StandDesk, I merely can’t complete this testimonial without stating the many, apparently limitless troubles I came across trying to obtain my desk assembled.

For starters, the desk I was sent really did not have any kind of memory handset included originally, which implied I had no way of in fact controlling the up/down feature on the desk itself. I got in touch with StandDesk about this problem, that got back to me around a day later with an apology and also a pledge that a new one would certainly be shipped out shortly.

Standdesk evaluation handset

The source of all our problems …
Concerning four days later a mobile got here in the mail. The phone initially turned on, but it had not been long prior to I noticed that none of the programmable buttons functioned, nor did the down button, however, for some reason the “memory” button dealt with the down feature simply great. I spoke to the company again, as well as they excused the mixup and also said they would have a new panel and also control box bent on me within the week.

Over 2 weeks later my new panel and also control box arrived. When I mounted them both the desk ultimately started functioning the means it was meant to, yet not after almost a month of waiting and also backward and forward with a firm that could not remember to deliver a core element of their item inside the same box from the start.

Things to Consider

Despite its bankable functions, this stand desk additionally has its own downsides. Since no particular stand workdesk could catch every one of the functions that you might need, you may take into consideration these in your decision-making.

Absence of a Bar as requirement

Not having a maintaining crossbar is certainly not a deal-breaker, especially thinking about a few of our various other preferred workdesks such as the Completely Jarvis also don’t have one. As a matter of fact, this workdesk does have one if you desire, however it is a paid add-on (much more on this later on too).

The bar is seen by some as a hindrance, making it harder to place your legs pleasantly listed below the desk. Others, on the other hand, find that they offer added security, commonly essential when desks are fully expanded.

We have not check out any type of problems of the security of this desk, so we do not assume its something to actually be concerned regarding, although if you truly wanted a desk with a crossbar after that we recommend you take a look at the Varidesk ProDesk 60 Electric.

Additionally, StandDesk does offer a separate add-on crossbar that you can include in the desk yourself, just for an extra $49.95.

Security

The stability of a standing workdesk is one of one of the most important aspects of these workdesks. Without a secure desk you’ll locate it hard to focus, which can bring about you becoming much less thinking about making use of the desk at standing elevation. To get the most effective return on your investment, you’ll want to be happy when making use of the desk.

Due To The Fact That the StandDesk Simple is the first desk that I have checked with an optional cross support, I will certainly break down my stability examinations into two sections. Both examinations will certainly include the regular front to back rocking examination and a left to ideal wobble. The very first will lack the cross support and the secondly will be with it. Simply to note, StandDesk.co claims that the enhancement of the cross assistance can enhance security by as much as 15%. I have no concept just how they created that number.

Without Cross Support

Left to Right: The wobble examination was a various scenario. StandDesk Simple was the 2nd desk that I evaluated that wobbled near the bottom with weight on the desktop computer. The very first was the IKEA Bekant. By the time it reached 36″ the shaking movement misbehaved. Yet factor it would certainly affect your work.

With Cross Assistance

Front to Back: Adding the cross support does not impact the rocking motion. The StandDesk Simple started to experienced a rocking activity at 36″. By 41″ the rocking motion misbehaved.

Entrusted to Right: Adding the cross support to the StandDesk boosted the wobble movement for reduced heights. With the cross support the wobble activity didn’t begin up until you reached 35″. By 39″ the wobble movement ended up being bad.

Note: It’s really crucial with adjustable standing desks to completely tighten all hardware. If there is equipment that is not totally tight, the movement experienced when included standing elevation will certainly be exaggerated. This is particularly real with a desk framework that consists of 32 bolts, there are much way too many factors at which the desk has an opportunity to move.

Verdict

Like all the Chinese bases we’ve evaluated in our labs, we need to narrow our recommendation on the StandDesk Pro to much shorter customers with narrower desktop computers, as the stability just isn’t there for a big mass boosted high off the ground. American-made desks will be much better fit to these applications, as well as for a fairly apparent reason. Basically all American-made bases are made in United States factories that are owned by Swedish, Danish or German companies that designed this sector, as well as their average residents are a lot taller than the typical Eastern customer, so they began making longer-stroke lifting legs a very long time earlier. And also they have much more robotic automation, laser-cutting tools, and large experience making standing workdesk bases, obviously.

Yet if you’re not also high, don’t have an inordinate amount of heavy equipment on your desktop, as well as do not require as well wide of a workdesk, the StandDesk Pro will give you good bang for your buck.

All that could change with Yu’s promised StandDesk Pro 2.0 style that he anticipates to release sometime in the future. Initially we were told we ‘d see it by June 2018. Greater than a year later on it has yet to appear, as well as Yu states he’s had problem obtaining the item high quality he needs out of several Chinese factories he’s attempted dealing with. The brand-new design is allegedly mosting likely to be a lot easier to set up and have a heftier crossbar layout, among other refinements. He claims the new base will be offered in both a “T-Leg” as well as “C-Leg” arrangement, minimizing our worry regarding side-load stressing on the training columns.

If this new base ever pertains to market we’ll upgrade you right here. We’re not holding our breath any type of longer as the most current news on the business is that Yu shut the small Los Angeles office and has actually transferred it to join with all its various other staff members in southeast Asia.

In the meantime, a new $399 standing desk with impressive performance has been present through the brand-new joint endeavor in between US-based iMovR as well as China-based Eureka, the i1 electric standing workdesk. While limited in dimension and also color choices, it has actually taken the mantle far from StandDesk’s long-ago condition as the very best standing workdesk under $400.